- per page
Mikuni VM16 Hand Choke Control Plunger Assembly
SKU: PYA12815
Mikuni VM16 Carburetor Hand Choke Control Plunger Assembly Yamaha RD/DT Etc
Fit's Yamaha DT50 / RD50 etc
Product information
Hand choke control
For the Mikuni VM16 remake carburetor
Yamaha DT/RD
Fit's Yamaha DT50 / RD50 etc
Product information
Hand choke control
For the Mikuni VM16 remake carburetor
Yamaha DT/RD
£9.99
(€11.49)
Market price: £28.60
, save 65%
MINARELLI 50cc (OLD AM6 ENGINE) CONNECTING ROD KIT
SKU: P03.7000
MINARELLI 50cc (OLD AM6 ENGINE) CONNECTING ROD KIT
CONNECTING ROD KITS ARE SUPPLIED COMPLETE WITH CRANK PIN, MADE IN JAPAN!
BIG AND SMALL END BEARINGS AND THRUST WASHERS (WHERE APPLICABLE)
THE PHOTOGRAPH IS OF THE TYPE OF ROD KIT (2 or 4 STROKE), NOT THE ACTUAL MODEL.
** FOR SPECIFICATION SEE NEXT PAGE**
CONNECTING ROD KITS ARE SUPPLIED COMPLETE WITH CRANK PIN, MADE IN JAPAN!
BIG AND SMALL END BEARINGS AND THRUST WASHERS (WHERE APPLICABLE)
THE PHOTOGRAPH IS OF THE TYPE OF ROD KIT (2 or 4 STROKE), NOT THE ACTUAL MODEL.
** FOR SPECIFICATION SEE NEXT PAGE**
£46.50
(€53.48)
Market price: £59.99
, save 22%
Minarelli 50cc Am6 Crank Main Bearings & Oil Seals
SKU: minbebearingkit
Minarelli 50cc Am6 Crank Main Bearings & Oil Seals
£15.99
(€18.39)
Market price: £18.00
, save 11%
MINARELLI 50CC CRANKSHAFT RECONDITIONED EXCHANGE UNIT
SKU: 12.7002
MINARELLI 50CC CRANKSHAFT RECONDITIONED EXCHANGE UNIT (PRICE INC UK VAT SALES @20%)
PREDATOR EXCHANGE CRANKSHAFT UNIT WITH NEW FOLLOWING PARTS FITTED
CONROD, CONROD PIN, BIG END BEARING, SMALL END BEARING, THRUST WASHERS IF NEEDED & BALANCED !
** NOTE CONDITIONS ON NEXT PAGE**
PREDATOR EXCHANGE CRANKSHAFT UNIT WITH NEW FOLLOWING PARTS FITTED
CONROD, CONROD PIN, BIG END BEARING, SMALL END BEARING, THRUST WASHERS IF NEEDED & BALANCED !
** NOTE CONDITIONS ON NEXT PAGE**
£82.13
(€94.45)
Market price: £99.99
, save 18%
MINARELLI AM MINARELLI AM6 TOP GASKET SET
SKU: 751.88.14
MINARELLI AM MINARELLI AM6 TOP GASKET SET
(THIS IS THE CORRECT ONE WITH THE BIG O'RING CYLINDER GASKET WITH X4 SMALL O'RINGS FOR STUDS.)
Seal kit for JMT cylinder Minarelli AM6 engine.
Also suitable for OE cylinders.
(THIS IS THE CORRECT ONE WITH THE BIG O'RING CYLINDER GASKET WITH X4 SMALL O'RINGS FOR STUDS.)
Seal kit for JMT cylinder Minarelli AM6 engine.
Also suitable for OE cylinders.
£9.99
(€11.49)
Market price: £12.00
, save 17%
MINARELLI AM6 CYLINDER KIT STD CAST IRON
SKU: 756.03.58
MINARELLI AM6 CYLINDER KIT STD CAST IRON
(THIS IS THE CORRECT ONE WITH THE BIG O'RING CYLINDER GASKET WITH X4 SMALL O'RINGS FOR STUDS.)
50cc standard gray cast iron cylinder from JMT without performance increase.
Bore: 40.3mm as original.
The exhaust assembly takes place with springs.
The sentence contains:
cylinder
Piston with bolts and clips
piston rings
Packing set
(THIS IS THE CORRECT ONE WITH THE BIG O'RING CYLINDER GASKET WITH X4 SMALL O'RINGS FOR STUDS.)
50cc standard gray cast iron cylinder from JMT without performance increase.
Bore: 40.3mm as original.
The exhaust assembly takes place with springs.
The sentence contains:
cylinder
Piston with bolts and clips
piston rings
Packing set
£79.99
(€91.99)
Market price: £112.00
, save 29%
MINARELLI AM6 MOTOR COMPLETE STD PISTON KIT
SKU: 756.03.71
MINARELLI AM6 MOTOR COMPLETE STD PISTON KIT
50cc standard.
Bore: 40.3mm as original.
Piston and clips
piston rings.
50cc standard.
Bore: 40.3mm as original.
Piston and clips
piston rings.
£10.89
(€12.52)
Market price: £28.00
, save 61%
MINARELLI AM6 REED VALVE BLOCK with Reeds
SKU: 724.05.63
MINARELLI AM6 REED VALVE BLOCK with Reeds
Diaphragm block with glass fiber Reeds suitable for Minarelli AM6 and Derbi Senda.
This diaphragm block has long holes, so it fits on both engines.
Diaphragm block with glass fiber Reeds suitable for Minarelli AM6 and Derbi Senda.
This diaphragm block has long holes, so it fits on both engines.
£22.90
(€26.34)
Market price: £28.00
, save 18%
MINARELLI AM6 Small End Bearing Minarelli Engines
SKU: minsebearing
MINARELLI AM6 Small End Bearing Minarelli Engines
Fits Motorhispania Rx 50 Am6
Fits Motorhispania Rx 50 Am6
£4.99
(€5.74)
Market price: £8.00
, save 38%
MINARELLI P6R/RV6 CONNECTING ROD KIT
SKU: P03.7003
MINARELLI P6R/RV6 CONNECTING ROD KIT
CONNECTING ROD KITS ARE SUPPLIED COMPLETE WITH CRANK PIN, MADE IN JAPAN!
BIG AND SMALL END BEARINGS AND THRUST WASHERS (WHERE APPLICABLE)
THE PHOTOGRAPH IS OF THE TYPE OF ROD KIT (2 or 4 STROKE), NOT THE ACTUAL MODEL.
** FOR SPECIFICATION SEE NEXT PAGE**
CONNECTING ROD KITS ARE SUPPLIED COMPLETE WITH CRANK PIN, MADE IN JAPAN!
BIG AND SMALL END BEARINGS AND THRUST WASHERS (WHERE APPLICABLE)
THE PHOTOGRAPH IS OF THE TYPE OF ROD KIT (2 or 4 STROKE), NOT THE ACTUAL MODEL.
** FOR SPECIFICATION SEE NEXT PAGE**
£49.99
(€57.49)
Market price: £62.99
, save 21%
Mirrors 8mm Chrome Round Left & Right Early Honda Style (PAIR)
SKU: H581708
Mirrors 8mm Chrome Round Left & Right Early Honda Style (PAIR)
£21.00
(€24.15)
Market price: £34.50
, save 39%
Mitre 2.5 Inch
SKU: TG63MSA
Mitre 2.5 Inch
Specification
Configuration Single
Finish Polished
Height 63 MM
Inlet Diameter 63 MM
Length 200 MM
Outlet Diameter 2.5 Inch
Width 63.5 MM
Specification
Configuration Single
Finish Polished
Height 63 MM
Inlet Diameter 63 MM
Length 200 MM
Outlet Diameter 2.5 Inch
Width 63.5 MM
£15.60
(€17.94)
Market price: £35.00
, save 55%
Mitre 2.5 Inch (DTM)
SKU: TG63MSDTM
Mitre 2.5 Inch (DTM)
Specification
Configuration Single
Finish Polished
Height 63 MM
Inlet Diameter 63 MM
Length 245 MM
Outlet Diameter 2.5 Inch
Width 63 MM
Specification
Configuration Single
Finish Polished
Height 63 MM
Inlet Diameter 63 MM
Length 245 MM
Outlet Diameter 2.5 Inch
Width 63 MM
£30.00
(€34.50)
Market price: £48.00
, save 38%
Mitre 3 Inch
SKU: m3i
Mitre 3 Inch
Specification
Configuration Single
Finish Polished
Height 76 MM
Inlet Diameter 76 MM
Length 210 MM
Outlet Diameter 3 Inch
Width 76 MM
Specification
Configuration Single
Finish Polished
Height 76 MM
Inlet Diameter 76 MM
Length 210 MM
Outlet Diameter 3 Inch
Width 76 MM
£15.60
(€17.94)
Market price: £25.00
, save 38%
Mitre 3 Inch (Long, DTM)
SKU: m3ild
Mitre 3 Inch (Long, DTM)
Specification
Configuration Single
Finish Polished
Height 76 MM
Inlet Diameter 76 MM
Length 245 MM
Outlet Diameter 3 Inch
Width 76 MM
Specification
Configuration Single
Finish Polished
Height 76 MM
Inlet Diameter 76 MM
Length 245 MM
Outlet Diameter 3 Inch
Width 76 MM
£21.20
(€24.38)
Market price: £35.00
, save 39%
Mitre 3 Inch Twin (DTM)
SKU: m3itd
Mitre 3 Inch Twin (DTM)
Specification
Configuration Twin
Finish Polished
Height 70 MM
Inlet Diameter 67 MM
Length 260 MM
Outlet Diameter 3 Inch
Width 160 MM
Specification
Configuration Twin
Finish Polished
Height 70 MM
Inlet Diameter 67 MM
Length 260 MM
Outlet Diameter 3 Inch
Width 160 MM
£69.60
(€80.04)
Market price: £80.00
, save 13%
Mitre 3.5 Inch
SKU: m3.5i
Mitre 3.5 Inch
Specification
Configuration Single
Finish Polished
Height 88 MM
Inlet Diameter 89 MM
Length 200 MM
Outlet Diameter 3.5 Inch
Width 89 MM
Specification
Configuration Single
Finish Polished
Height 88 MM
Inlet Diameter 89 MM
Length 200 MM
Outlet Diameter 3.5 Inch
Width 89 MM
£19.20
(€22.08)
Market price: £30.00
, save 36%
Mitre 3.5 Inch
SKU: m3.5i1
Mitre 3.5 Inch
Specification
Configuration Single
Finish Polished
Height 88 MM
Inlet Diameter 89 MM
Length 200 MM
Outlet Diameter 3.5 Inch
Width 89 MM
Specification
Configuration Single
Finish Polished
Height 88 MM
Inlet Diameter 89 MM
Length 200 MM
Outlet Diameter 3.5 Inch
Width 89 MM
£19.20
(€22.08)
Market price: £30.00
, save 36%
Mitre 3.5 Inch Twin (DTM)
SKU: m3.5itd
Mitre 3.5 Inch Twin (DTM)
Specification
Configuration Twin
Finish Polished
Height 90 MM
Inlet Diameter 57 MM
Length 315 MM
Outlet Diameter 3.5 Inch
Width 185 MM
Specification
Configuration Twin
Finish Polished
Height 90 MM
Inlet Diameter 57 MM
Length 315 MM
Outlet Diameter 3.5 Inch
Width 185 MM
£69.60
(€80.04)
Market price: £80.00
, save 13%
- per page
