SUZUKI RGV250 H/D POWER VALVE SET OF 4
This power-valve set consists of the newest generation power-valves and can be used for both the Suzuki RGV250 motorcycles. The power-valves are made in a special way, so that they're more durable and less prone to carbon/engine deposits.
It's a good thing to protect your engine as much as possible against engine/carbon deposits, since they can severely decrease the performance of your engine, or even worse: lead to an engine stall if left unattended!
The sets have been tested for a long time on not only test benches, but also real circuits. Both circuit-racing motorcycles and standard motorcycles were used during tests.
No more problems with the power-valve pin, that has to be replaced every 20,000 kilometers (12,427.5 miles) to avoid serious engine damage. These power-valves are the ultimate solution!
Product info:
Contains 4 Power valves
Suzuki RGV250
The Suzuki RGV250 is a Suzuki high performance sport bike which had a great number of its features and design cues based on Grand Prix technologies and ideas. It is a race-replica based on Suzuki's 250 cc GP bikes from the late '80's and 90's. The top speed of a standard RGV250 is around 209 km/h (130 mph).
The Suzuki RGV250 VJ22 model, produced from 1991 to 1996, had the following improvements in comparison to the VJ21, such as:
Suzuki Advanced Power Control (SAPC), Electronic power valve and ignition timing control
- 17" rear wheel
- 310 mm front discs
- 34 mm Mikuni carburetors with dual air bleed system
- and more
This power-valve set consists of the newest generation power-valves and can be used for both the Suzuki RGV250 motorcycles. The power-valves are made in a special way, so that they're more durable and less prone to carbon/engine deposits.
It's a good thing to protect your engine as much as possible against engine/carbon deposits, since they can severely decrease the performance of your engine, or even worse: lead to an engine stall if left unattended!
The sets have been tested for a long time on not only test benches, but also real circuits. Both circuit-racing motorcycles and standard motorcycles were used during tests.
No more problems with the power-valve pin, that has to be replaced every 20,000 kilometers (12,427.5 miles) to avoid serious engine damage. These power-valves are the ultimate solution!
Product info:
Contains 4 Power valves
Suzuki RGV250
The Suzuki RGV250 is a Suzuki high performance sport bike which had a great number of its features and design cues based on Grand Prix technologies and ideas. It is a race-replica based on Suzuki's 250 cc GP bikes from the late '80's and 90's. The top speed of a standard RGV250 is around 209 km/h (130 mph).
The Suzuki RGV250 VJ22 model, produced from 1991 to 1996, had the following improvements in comparison to the VJ21, such as:
Suzuki Advanced Power Control (SAPC), Electronic power valve and ignition timing control
- 17" rear wheel
- 310 mm front discs
- 34 mm Mikuni carburetors with dual air bleed system
- and more
