1/4 X 11/16 - 20 UNF PRO BOLT DOMED
SKU: PRO7759466
1/4 X 11/16 - 20 UNF PRO BOLT DOMED
SHORT FULL THREAD BOLT
IN STAINLESS STEEL
FIT'S
HARLEY DAVIDSON CLUTCH COVER CIRCLES
MADE BY PRO-BOLT
SHORT FULL THREAD BOLT
IN STAINLESS STEEL
FIT'S
HARLEY DAVIDSON CLUTCH COVER CIRCLES
MADE BY PRO-BOLT
£2.15
(€2.47)
Market price: £3.05
, save 30%
1/4 X 2 1/2 - 20 UNF PRO BOLT DOMED
SKU: PRO7759468
1/4 X 2 1/2 - 20 UNF PRO BOLT DOMED
LONG WITH 35mm Plain Shank then 25mm THREAD BOLT
IN STAINLESS STEEL
FIT'S
HARLEY DAVIDSON CLUTCH COVER CIRCLES
MADE BY PRO-BOLT
LONG WITH 35mm Plain Shank then 25mm THREAD BOLT
IN STAINLESS STEEL
FIT'S
HARLEY DAVIDSON CLUTCH COVER CIRCLES
MADE BY PRO-BOLT
£2.80
(€3.22)
Market price: £3.30
, save 15%
1/4 X 3/4 - 20 UNF PRO BOLT DOMED
SKU: PRO7759467
1/4 X 3/4 - 20 UNF PRO BOLT DOMED
SHORT FULL THREAD BOLT
IN STAINLESS STEEL
FIT'S
HARLEY DAVIDSON CLUTCH COVER CIRCLES
MADE BY PRO-BOLT
SHORT FULL THREAD BOLT
IN STAINLESS STEEL
FIT'S
HARLEY DAVIDSON CLUTCH COVER CIRCLES
MADE BY PRO-BOLT
£1.90
(€2.19)
Market price: £2.30
, save 17%
H/D FL, FX OIL SEAL MOTOR SPROCKET SHAFT (EACH)
SKU: DS 194455
HARLEY DAVIDSON FL, FX OIL SEAL MOTOR SPROCKET SHAFT (EACH)
Overview of Product:
• An oil seal and a wiper seal to minimize contamination reaching the oil seal
• Specially developed NBR elastomer with lower friction characteristics
• Wiper seal with optional dual lip design for high contamination situations
• New oil seal lip geometry specific to fork seals
• Increased life and performance
• Enhanced water and dirt protection capability
• Reduced and constant friction over the life of seal
• Much improved ride comfort
• Compatibility with a wide range of OE and aftermarket oils
• Reduced wear and air suction
OEM Numbers: 12026B
Overview of Product:
• An oil seal and a wiper seal to minimize contamination reaching the oil seal
• Specially developed NBR elastomer with lower friction characteristics
• Wiper seal with optional dual lip design for high contamination situations
• New oil seal lip geometry specific to fork seals
• Increased life and performance
• Enhanced water and dirt protection capability
• Reduced and constant friction over the life of seal
• Much improved ride comfort
• Compatibility with a wide range of OE and aftermarket oils
• Reduced wear and air suction
OEM Numbers: 12026B
£4.02
(€4.62)
Market price: £7.90
, save 49%
H/D FL, FX, XL O-RING TAPPET GUIDE TO PUSH ROD COVER (5PK)
SKU: DS 174333
HARLEY DAVIDSON FL, FX, XL O-RING TAPPET GUIDE TO PUSH ROD COVER (5PK)
Overview of Product:
• O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus.
• Loop of elastomer with a round cross-section.
• Designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
OEM Numbers: 11145
Overview of Product:
• O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus.
• Loop of elastomer with a round cross-section.
• Designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
OEM Numbers: 11145
£3.00
(€3.45)
Market price: £6.00
, save 50%
H/D FL, FX, XL QUAD SEAL TAPPET GUIDE TO PUSH ROD COVER (5pk)
SKU: DS 194484
HARLEY DAVIDSON FL, FX, XL QUAD SEAL TAPPET GUIDE TO PUSH ROD COVER (5 pk)
Features and Overview:
• Convenient and efficient way to sell the correct amount of seals or O-rings for a rebuild or cam change
• James complete kits are neatly packaged for easy display
• Made in the U.S.A.
OEM Numbers: 11145X
Features and Overview:
• Convenient and efficient way to sell the correct amount of seals or O-rings for a rebuild or cam change
• James complete kits are neatly packaged for easy display
• Made in the U.S.A.
OEM Numbers: 11145X
£2.22
(€2.55)
Market price: £4.29
, save 48%
H/D FLH, FLHR, FLHS, FLTC, ETC 1340cc Engine V96 Tüv Black (COMPLETE) with super G carb etc
SKU: 09010195
H/D FLH, FLHR, FLHS, FLTC, ETC 1340cc Engine V96 Tüv Black (COMPLETE) with super G carb etc
Features and benefits:
V-Series Tüv Approved Engines
Meets Eu Chapter 9 Standards 2002/51/Ec For Exhaust 97/24/Ec For Noise
S&S ist Knock Sensing Ignition System
Knock Sensing Ignition Control Prolongs Engine Life By Automatically Adjusting Timing To Eliminate Knock By Learning and Storing Ignition Requirements Of the Engine
Guardian Feature Ensures Proper Engine Break-In and Protects Engine With A 3 Step Breakinrev-Limiter For First 24 Hours Of Operation
Chrome Gearcover and Tappet Covers
Classic Teardrop Air Cleaner Instructions and Required Certification Documentation Included
V113 Meets Euro Iii Emission Levels
V96/V124 Meet Euro Ii Emission Levels
Note: V-Series service manual available Part #4201-0183.
Features and benefits:
V-Series Tüv Approved Engines
Meets Eu Chapter 9 Standards 2002/51/Ec For Exhaust 97/24/Ec For Noise
S&S ist Knock Sensing Ignition System
Knock Sensing Ignition Control Prolongs Engine Life By Automatically Adjusting Timing To Eliminate Knock By Learning and Storing Ignition Requirements Of the Engine
Guardian Feature Ensures Proper Engine Break-In and Protects Engine With A 3 Step Breakinrev-Limiter For First 24 Hours Of Operation
Chrome Gearcover and Tappet Covers
Classic Teardrop Air Cleaner Instructions and Required Certification Documentation Included
V113 Meets Euro Iii Emission Levels
V96/V124 Meet Euro Ii Emission Levels
Note: V-Series service manual available Part #4201-0183.
£5801.20
(€6671.38)
Market price: £6299.99
, save 8%
H/D ROCKER COVER BASE GASKET RUBBER COATED METAL (84-02) FX, FL, XL,XR (PAIR)
SKU: DS 174203
H/D ROCKER COVER BASE GASKET RUBBER COATED METAL (84-02) FX, FL, XL,XR (PAIR)
Features and Overview:
• Rubber-Covered Metal (RCM)
• Foamet® Expanded Rubber Gaskets
• MicroPore® Paper Gaskets
• Expanded Metal Core Head Gaskets
• The Rubber-Covered Metal line of gaskets are made from a solid steel sheet coated on two sides with a high-temperature elastomer. Strategically placed elastomer beading helps insure a positive seal while our clear silicone conformal coating fills in minor imperfections in the flanges and provides for easy release upon removal. They have excellent torque retention properties and will not extrude under high torque load.
• Our Foamet® product line features an aluminum core coated on two sides with expanded nitrile rubber then coated with a silicone release coating to insure a positive seal with excellent release characteristic upon disassembly. Available in beaded and non-beaded construction depending on the application.
• The James Gasket flexible paper gasket product line utilizes the latest in gasket paper technology called MicroPore®. These gaskets exhibit exceptional fluid resistance and sealability in a wide range of applications and flange conditions. With a reduced pore size, this material is very resistant to wicking or fluid migration through the material and capable of handling operating temperatures in excess of 500 degrees.
• Our expanded metal core head gaskets are made from top quality graphite-coated high-temperature fiber material chemically and mechanically fused to an expanded metal core. They provide excellent sealing performance, load retention, and structural strength and provide a clean release upon removal. The stainless steel armor protects the cylinder bore from the hot combustion gasses and provides a positive seal at the combustion chamber.
• Drag Specialties has all your gasket needs covered
• All are top-quality Genuine James gaskets, seals and O-rings
• Made in the U.S.A.
OEM Numbers: 16779-99X
Features and Overview:
• Rubber-Covered Metal (RCM)
• Foamet® Expanded Rubber Gaskets
• MicroPore® Paper Gaskets
• Expanded Metal Core Head Gaskets
• The Rubber-Covered Metal line of gaskets are made from a solid steel sheet coated on two sides with a high-temperature elastomer. Strategically placed elastomer beading helps insure a positive seal while our clear silicone conformal coating fills in minor imperfections in the flanges and provides for easy release upon removal. They have excellent torque retention properties and will not extrude under high torque load.
• Our Foamet® product line features an aluminum core coated on two sides with expanded nitrile rubber then coated with a silicone release coating to insure a positive seal with excellent release characteristic upon disassembly. Available in beaded and non-beaded construction depending on the application.
• The James Gasket flexible paper gasket product line utilizes the latest in gasket paper technology called MicroPore®. These gaskets exhibit exceptional fluid resistance and sealability in a wide range of applications and flange conditions. With a reduced pore size, this material is very resistant to wicking or fluid migration through the material and capable of handling operating temperatures in excess of 500 degrees.
• Our expanded metal core head gaskets are made from top quality graphite-coated high-temperature fiber material chemically and mechanically fused to an expanded metal core. They provide excellent sealing performance, load retention, and structural strength and provide a clean release upon removal. The stainless steel armor protects the cylinder bore from the hot combustion gasses and provides a positive seal at the combustion chamber.
• Drag Specialties has all your gasket needs covered
• All are top-quality Genuine James gaskets, seals and O-rings
• Made in the U.S.A.
OEM Numbers: 16779-99X
£20.59
(€23.68)
Market price: £25.59
, save 20%
