SCOOTER DRIVE BELT 812mm long x 22.5mm wide x 10.5mm thick
Performance sourced
Scooter drive belt
Direct replacement for original equipment
*Drive belts should be changed every 2000 miles with veriator rollers to save loss of engine power !*
We have sourced these drive belts to be a good source of keeping your machine on the road at a cost saving.
Just fit and forget.
Your old drive belt will have total length stamped on back with total width and last total thickness like this (625 18 30)
Most are marked up with the wrong last digits ie thickness so we have measured each belt to give correct thickness so measures your belt from outer flat surface to bottom of inner tooth to get your thickness (this last bit will not change when belt wares out as width is the bit that ware's
Performance sourced
Scooter drive belt
Direct replacement for original equipment
*Drive belts should be changed every 2000 miles with veriator rollers to save loss of engine power !*
We have sourced these drive belts to be a good source of keeping your machine on the road at a cost saving.
Just fit and forget.
Your old drive belt will have total length stamped on back with total width and last total thickness like this (625 18 30)
Most are marked up with the wrong last digits ie thickness so we have measured each belt to give correct thickness so measures your belt from outer flat surface to bottom of inner tooth to get your thickness (this last bit will not change when belt wares out as width is the bit that ware's
